🧮 Carbon Fiber Tube Weight Calculator
Note: default density 1.55 g/cm³ (typical T300 roll-wrapped tube). Pultruded ≈ 1.50. Actual weight varies ±5% with resin content; bulk orders confirmed by scale.
⚠️ Disclaimer: Dimensions, layup schedules, and manufacturing processes vary by specification and supplier — results are theoretical estimates for reference only. Actual values may differ and shall not be used as acceptance criteria.
📩 Need bulk / custom specs? Get a Quote →
🛒 Need small qty / prototypes? Buy retail →
How to Use This Carbon Fiber Tube Weight Calculator
Enter the outer diameter (OD), wall thickness, and length of your carbon fiber tube, and this free carbon fiber tube weight calculator instantly returns the theoretical weight in grams and kilograms, plus the per-meter weight and computed inner diameter. The default density of 1.55 g/cm³ matches Toray T300 roll-wrapped tubing; switch to 1.50 for pultruded profiles.
Weight Formula Explained
The math behind the tool is straightforward: Weight = π × (OD² − ID²) ÷ 4 × Length × Density, where ID = OD − 2 × wall. Because carbon composite density is only about one-fifth of steel and half of aluminium, a 30 mm OD × 2 mm wall × 1 m tube weighs roughly 270 g — the same aluminium tube would weigh over 500 g. That is why drones, robotics arms, camera stabilizers, and racing components specify carbon tubing wherever every gram counts.
Roll-Wrapped vs Pultruded Weight Differences
Roll-wrapped tubes (our main product line) use layered Toray T300 prepreg cured under heat and pressure, giving a density around 1.55–1.60 g/cm³ with excellent surface finish in 3K plain or twill weave. Pultruded tubes run slightly lighter at ~1.45–1.50 g/cm³ thanks to higher fiber volume fraction, but with a unidirectional surface. If you are comparing supplier quotes, always check whether the quoted weight is theoretical or scale-weighed — resin content swings ±5% between batches. Every bulk order from WHABEST carbon fiber tubes ships with dimensional and weight verification.
From Calculation to Custom Order
Once you know your target weight, browse our full carbon fiber tube range (OD 10–60 mm stock, custom up to 200 mm) or jump straight to custom manufacturing if you need non-standard diameters, tapered sections, or CNC-machined fittings. For budget planning, 1 kg of finished T300 tube typically requires ~1.1 kg of prepreg input — contact our engineers with your OD/wall/length and quantity for a 12-hour quote.
Frequently Asked Questions
How accurate is this carbon fiber tube weight calculator?
Theoretical values land within ±5% of scale weight. Resin bleed during curing is the main variable. For aerospace or medical orders we provide batch weighing reports on request.
What density should I use for T700 or high-modulus tubes?
T700 is nearly identical (~1.55 g/cm³). High-modulus fiber (M40/M55) runs slightly denser at ~1.6–1.7 g/cm³ — nudge the density input up for those grades.
Can I get a tube lighter than the calculator shows?
Yes: thinner walls, larger diameters with the same wall (better stiffness-to-weight), or filament-wound construction. Our engineers routinely help clients cut 15–30% weight versus their first draft — ask us.